What is the difference between CFLS and led lights

Posted by

Abstr: There are more types of lamps on the market, common led lights, energy-saving lamps, etc., different types of its characteristics are not the same, so what is the difference between energy-saving lamps and led lights?

1, brightness is different

The luminous flux of energy-saving lamps is generally 3 watts, and the luminous flux of led lamps is generally 1 watt, the greater the luminous flux, the lower the brightness, so the brightness of energy-saving lamps is generally lower than the brightness of led lamps.

2. Different power consumption

In the case of the same brightness, Led lights consume 1 KWH of electricity for 1000 hours, while ordinary energy-saving lamps consume 1 KWH of electricity for 100 hours, it can be seen that Led lights are more power-saving products in the lighting field.

3, different service life

Because the life of the Led lamp is affected by the chip of the light-emitting diode, there is no fuse of the filament of the energy-saving lamp, so the life of the led lamp is greater than that of the energy-saving lamp. The service life of ordinary energy-saving lamps can reach 10,000 hours, while the service life of Led lamps is longer, up to 100,000 hours.

4, environmental protection is different

The interior of the energy-saving lamp tube will generally be filled with mercury, mercury and other harmful substances, when the energy-saving lamp is used for a long time, the sealing of the energy-saving lamp will appear gaps, then the mercury inside the lamp tube will be volatilized into the air, causing pollution to the indoor environment. led lights generally do not have environmental pollution problems in this area, because the materials used in led lights are very safe and environmentally friendly.

5. The price is different

led lights will have more high-quality characteristics than energy-saving lamps, so the price of most led lights on the market will be more expensive than the price of energy-saving lamps.

6, production technology is different

In the normal process of light, the main luminous material is tungsten wire, and the tube of the energy-saving lamp is generally designed to be in a vacuum state, and the inside of the tube is generally filled with mercury. led lights are generally composed of multiple led beads connected in parallel or in series.

How to repair a flash after the energy-saving lamp is turned on

The flashing of the energy-saving lamp after turning on the light may be one of the following reasons:

1, the bulb itself has a problem: the internal electrode of the bulb is damaged, the lamp glass is damaged, the lamp resistance is too large, etc., which may cause the lamp to flash after turning on the light.

2, the circuit has a problem: the energy-saving lamp needs a stable power supply, if the circuit is unstable or the circuit components are damaged, it may cause the energy-saving lamp to flash after turning on the light.

3, installation problems: If the energy-saving lamp is improperly installed, it may lead to insufficient power supply or unstable power circuit, resulting in a flash after the energy-saving lamp is turned on.

The solution:

1, turn off the power: first cut off the power to avoid electric shock accidents.

2, replace the bulb: if the bulb itself has a problem, it is recommended to replace the bulb to ensure the stability and service life of the bulb.

3, check the circuit: If there is a problem with the circuit, it is recommended to check whether there is a short circuit, open circuit, etc., and repair or replace the circuit components according to the situation.

4, reinstall: If there is a problem with the installation, it is recommended to reinstall the energy-saving lamp to ensure a stable power supply.